https://influxia.net/yify-windows-10-pro-64-bit-official-image-disk-4gb-original-download/
https://raniaibnaiche.com/?p=609
https://theexclusiveofferzone.com/yify-windows-10-pro-full-version-iso-image-gratis-22h2-without-tpm-super-speed-download/
https://influxia.net/yify-download-windows-10-pro-64-bit-iso-gratis-1809-original/
https://influxia.net/yify-fixing-windows-installation-problems-with-training-tools/
https://influxia.net/yify-download-windows-10-pro-setup-directly-rufus/
https://influxia.net/yify-download-windows-10-pro-x64-crack-iso-only-direct-link-4gb-bypass-tmp-original/
https://raniaibnaiche.com/yify-fixing-windows-installation-problems-with-training-tools/
https://jcmlegalizacao.com/yify-download-windows-10-pro-usb-image-direct-link-build-1903-no-tpm-super-speed/
https://raniaibnaiche.com/yify-windows-10-professional-to-flash-drive-25h2-no-defender-download/
Fixing Windows Installation on UEFI Systems: A Step-by-Step Guide
UEFI systems, also known as Secure Boot systems, can be more challenging to install Windows on compared to traditional BIOS-based systems. However, with the right steps and tools, you can successfully install Windows on your UEFI system.
Pre-Requisites:
- BIOS Mode: Ensure that you are in the correct BIOS mode for UEFI installation.
- UEFI Firmware: Install the latest UEFI firmware on your motherboard to enable Secure Boot support.
- UEFI Secure Boot: Enable Secure Boot on your UEFI system to prevent tampering with the installation process.
Step 1: Prepare Your System
Before starting the installation, ensure that:
- Your system meets the minimum hardware requirements for Windows installation (see compatible systems below).
- You have the latest UEFI firmware installed.
- Your UEFI system is configured to boot from a USB device or an SSD with at least 8 GB of free space.
Step 2: Create a Bootable USB Drive
- Download and install Rufus, a popular tool for creating bootable USB drives (free).
- Follow the instructions in the Rufus wizard to create a bootable USB drive from your Windows installation media or a different operating system.
- Make sure the USB drive is at least 8 GB of free space.
Step 3: Set Up UEFI Boot Mode
- Enter your UEFI firmware settings by pressing F2, F12, or Del during startup (depending on your motherboard model).
- Look for the boot order menu and set it to prioritize your USB drive.
- Save and exit the UEFI firmware setup.
Step 4: Install Windows on UEFI System
- Insert your bootable USB drive into a free USB port on your system or insert an empty UEFI-enabled SSD (at least 8 GB of space).
- Restart your system while holding the following keys:
* F2 to enter the BIOS settings
* Shift + ESC to access the Windows Setup screen
- Enter your product key and press Enter.
- Follow the on-screen instructions to complete the installation process.
Troubleshooting Tips:
- If you encounter issues during installation, ensure that your UEFI firmware is up-to-date.
- Check if any UEFI settings are disabled or set to “Do Not Boot” in the UEFI firmware settings.
- Verify that your system meets the minimum hardware requirements for Windows installation.
Compatible Systems:
Windows 10 and later versions can be installed on most modern UEFI systems with:
- At least 8 GB of free space per drive
- A compatible motherboard model (see manufacturer’s website)
- An Intel or AMD processor with a certain level of CPU performance
However, it is essential to check the system requirements for specific hardware configurations.
Conclusion:
Installing Windows on an UEFI system requires careful preparation and attention to detail. By following these steps and troubleshooting tips, you should be able to successfully install Windows on your UEFI system. Remember to always backup your data before attempting a UEFI installation.